Integrable electromechanical swing door drive for accessible single leaf doors weighing up to 125 kg
- Drive is embedded in door leaf or frame and fulfils maximum design requirements
- Opening and closing speed can be individually adjusted
- Electrical latching action which accelerates the door shortly before the closed position
- Low-energy function opens the door with reduced speed, fulfilling the highest safety requirements
- Obstacle detection detects an object through contact and stops the opening or closing process
- Automatic reversing detects an obstacle and returns to the opening position
- Push & Go function triggers the automatic drive following light manual pressure on the door leaf
- Drive is used with guide rail
- Optional rechargeable battery provides maximum safety during a power failure
- Optional radio reception board for wireless activation by radio transmitter
ECturn Inside swing door drive system *
Application Areas
- Single-action, single leaf, right and left closing doors
- Single-action doors up to 1100 mm leaf width or 125 kg weight
- Entrance and interior doors with moderate access frequency
- For door leaf thicknesses from 55 mm
- Integrated installation in door or frame
- Barrier-free access
ECturn Inside swing door drive system Height 61 mm Depth 45 mm Leaf weight (max.) 1-leaf 125 kg Leaf width (min.-max.) 700 mm - 1100 mm Drive type Electromechanical Opening angle (max.) 110 ° DIN left Yes DIN right Yes Installation in the door leaf Yes Installation in the door frame Yes Electrical latching action Yes Activation delay (max.) 10 s Operating voltage 110 – 230 V Operating voltage 26.8 V Power rating 92 W Power supply for external consumers (24 V DC) 600 mA Service temperature -15 - 50 °C IP rating IP20 Mode of operation Off, Automatic, Permanently open, Night Type of function Fully automatic Automatic function Yes Low-energy function Yes Key function Yes Obstacle detection Yes Automatic reversing Yes Push & Go adjustable Operation Programme switch integrated in the drive, Programme switch TPS, MPS programme switch Parameter setting Control unit, Programme switch DPS Standard conformity EN 16005
