Semi-automatic system with swing door drive on active leaf and door closer on passive leaf
- Smart swing function for easy manual door opening
- Closing force of EN4-7 with variable adjustment
- Opening and closing speed can be adapted individually on the active leaf
- Mechanical latching action which accelerates the door shortly before the closed position
- Mechanical closing sequence control holds the active leaf in the waiting position until the passive leaf is closed
- Low-energy function opens the door with reduced speed, fulfilling the highest safety requirements
- Obstacle detection detects an object through contact and stops the opening or closing process
- Automatic reversing detects an obstacle and returns to the opening or closing position
- Push & Go function triggers the automatic drive components following manual door handle activation
- System available for use with roller guide rail or link arm
- Optional radio reception board for wireless activation by radio transmitter
GEZE Powerturn IS/TS 2-leaf swing door drive system *
Application Areas
- Right and left double leaf single-action doors
- Single-action doors up to 3200 mm hinge clearance with link arm installation
- Single-action doors up to 3000 mm hinge clearance with roller guide rail installation
- Minimum hinge clearance 1270 mm, minimum passive leaf width 470 mm (depending on installation type)
- Interior and exterior doors with high access frequency
- Symmetrical and asymmetrical division of door possible
- Transom installation hinge and opposite hinge side
Powerturn IS/TS 2-leaf swing door drive system Height 70 mm Depth 130 mm Length min. 1270 mm Length max. 3200 mm Leaf weight (max.) 1-leaf 600 kg Distance centre door hinge-drive axis (min.-max.) 2-leaf, link arm 1270 mm - 3200 mm Distance centre door hinge-drive axis (min.-max.) 2-leaf, roller guide rail 1380 mm - 3000 mm Leaf width (min.-max.) 470 mm - 1600 mm Reveal depth (max.) 160 mm Drive type Electromechanical Opening angle (max.) 136 ° Spring pre-load EN1 - EN7 DIN left Yes DIN right Yes Transom installation opposite hinge side with link arm Yes Transom installation hinge side with roller guide rail Yes Mechanical latching action Yes Electrical latching action Yes Electrical closing sequence control Yes Mechanical closing sequence control Yes Disconnection from mains Main switch in the drive Activation delay (max.) 10 s Operating voltage 230 V Power rating 200 W Power supply for external consumers (24 V DC) 1200 mA Service temperature -15 - 50 °C IP rating IP30 Mode of operation Automatic, Night, Permanently open, Shop closing, Off Type of function Fully automatic Automatic function Yes Low-energy function Yes function smart swing Yes Servo function Yes Key function Yes Obstacle detection Yes Automatic reversing Yes Push & Go adjustable Operation GEZEconnects (PC + Bluetooth), Service terminal ST 220, Programme switch DPS Parameter setting GEZEconnects (PC + Bluetooth), Service terminal ST 220 Standard conformity DIN 18650, EN 1158, EN 16005 Smoke switch integrated Yes